What a good tap repair should achieve
The drip is dealt with
We repair the worn part causing the leak rather than living around it.
Operation feels normal again
Stiff handles and poor shut-off are checked as part of the same visit.
Replacement only when needed
If a tap is too far gone, we explain why repair is no longer sensible.
More than a nuisance at the sink
A dripping tap can seem minor right up until the sound gets under your skin or the staining around the fitting starts to spread. We deal with dripping, stiffness, poor flow, loose fittings, taps that do not shut off cleanly and leaks around the body or connections. The type of tap and its condition help decide whether washers, cartridges, valves, seals or the whole fitting need attention. In Stourbridge homes, this is one of those faults people often tolerate for far too long, even though a persistent drip can waste water and wear out the surrounding sink, basin or bath area at the same time.
Repair where sensible, replace where wiser
We isolate the supply, dismantle the affected part, carry out the repair and then check the flow and shut-off operation before finishing up. In some cases, repairing an otherwise sound tap is the sensible route. In others, the fitting is too worn, unsuitable or troublesome to justify more time and parts. We explain that choice based on the tap in front of us rather than following one rule for every job. The aim is to leave you with a tap that works cleanly and quietly, which is a relief if the old one had become the house's least welcome night-time soundtrack.
Frequently asked questions
Can every dripping tap be repaired?
Not everyone. Some taps respond well to new internal parts, while others are too worn or awkwardly made for a lasting repair to be worthwhile. We check the tap type and condition first, then explain the practical options.
Why has the tap flow dropped as well?
Poor flow can be linked to the tap's internal parts, a blocked component or another issue affecting the supply to that outlet. We look at the symptom in context, because a drip and weak flow can belong to the same underlying fault.
When is replacement better than repair?
If the fitting is worn out, unsuitable or likely to keep causing trouble after more work, replacement can be the better answer. We base that on the tap's actual condition rather than suggesting a new one just for the sake of it.